EL
•
Snabb och trevlig hjälp från kundtjänst de få gånger jag behövt kontakta den.
Threaded CO2 Manifold - Three Way
2 recensioner
369 SEK
Description
Article no.: 898035
Gas Manifold which can be used to connect three kegs to a single CO2 bottle.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
Description
Article no.: 898035
Gas Manifold which can be used to connect three kegs to a single CO2 bottle.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
Recensioner
Baserat på 2 betyg2 betyg
| 5 | ☆ | |
| 4 | ☆ | |
| 3 | ☆ | |
| 2 | ☆ | |
| 1 | ☆ |
Recensioner (2)
Recensioner (2)
Powered by TestFreaks
SA
•
Super ,funkar utmärkt
LN
•
Fungerar som den ska.
Frågor och svar
Ställ en fråga
Frågor och svar