EL
•
Snabb och trevlig hjälp från kundtjänst de få gånger jag behövt kontakta den.
Threaded CO2 Manifold - Four Way
6 recensioner
479 SEK
Description
Article no.: 898045
Gas Manifold which can be used to connect four kegs to a single CO2 bottle.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
Description
Article no.: 898045
Gas Manifold which can be used to connect four kegs to a single CO2 bottle.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
Each outlet has a check valve and can be opened and closed individually.
All connections have 1/4" MFL threads.
Made of aluminium, brass and stainless steel.
Drilled holes for wall mounting.
Please note that due to the check valve mechanism there is about a 0.1 bar (2 psi) pressure drop over the ball valves. You may have to compensate for this by setting the pressure on the regulator about 0.1 bar higher than the desired pressure in the keg.
Recensioner
Baserat på 6 betyg6 betyg
| 5 | ☆ | |
| 4 | ☆ | |
| 3 | ☆ | |
| 2 | ☆ | |
| 1 | ☆ |
Recensioner (6)
Recensioner (6)
Powered by TestFreaks
D
•
Efter att själv byggt ihop några t-kopplingar för att koppla ihop mina keggar i kylen insåg jag att det inte funkade så bra utan backventil när man ansluter en ny kugge. Hittade denna ypperliga produkt som var lätt att installera då det bara var att skruva på JG kopplingar och sen trycka på befintliga slangar.
LL
•
En utmärkt lösning istället för att ha tre T-kopplingar i serie med en helsikes massa slang att hålla reda på. Går dessutom utmärkt att montera på en platta på baksidan av kylen tillsammans med hållaren för CO2-flaskan.
LN
•
Fungerar bra...
Visa fler recensioner
Frågor och svar
Ställ en fråga
Frågor och svar