EL
•
Snabb och trevlig hjälp från kundtjänst de få gånger jag behövt kontakta den.
TC 3" - 1.5" Conical
369 SEK
Description
Article no.: 849023
Stainless steel conical reducer from 3 "to 1.5" TC.
Length 18 cm.
TC (Tri-Clover or Tri-Clamp) is a connection system which is very easy to disassemble, clean and reassemble.
Each connection consists of two TC flanges, a gasket and a clamp. The parts can be combined in almost any configuration.
TC meets high hygiene standards and are commonly used both in breweries and in the pharmaceutical industry.
Length 18 cm.
TC (Tri-Clover or Tri-Clamp) is a connection system which is very easy to disassemble, clean and reassemble.
Each connection consists of two TC flanges, a gasket and a clamp. The parts can be combined in almost any configuration.
TC meets high hygiene standards and are commonly used both in breweries and in the pharmaceutical industry.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
Description
Article no.: 849023
Stainless steel conical reducer from 3 "to 1.5" TC.
Length 18 cm.
TC (Tri-Clover or Tri-Clamp) is a connection system which is very easy to disassemble, clean and reassemble.
Each connection consists of two TC flanges, a gasket and a clamp. The parts can be combined in almost any configuration.
TC meets high hygiene standards and are commonly used both in breweries and in the pharmaceutical industry.
Length 18 cm.
TC (Tri-Clover or Tri-Clamp) is a connection system which is very easy to disassemble, clean and reassemble.
Each connection consists of two TC flanges, a gasket and a clamp. The parts can be combined in almost any configuration.
TC meets high hygiene standards and are commonly used both in breweries and in the pharmaceutical industry.
Frågor och svar
Ställ en fråga
Frågor och svar (1)
Ställ en fråga
Frågor och svar (1)
Powered by TestFreaks
CP
•
När det gäller art.nr. 849023 så undrar jag hur måtten 3"resp. 1,5" är mätt! Är det ytterdiameter på flänsarna eller ytterdiameter på konen eller innerdiameter på konen?
✓
Hej,
Storleksangivelserna för TC (till exempel 1.5" eller 3") utgår från den teoretiska ytterdiameter som ett utgående rör maximalt skulle kunna ha. Då detta kan vara svårt att mäta, är det ofta lättare att utgå från ytterdiametern på TC-flänsen. T.ex. 1.5" TC : 50,5 mm och 3" TC : 91 mm.
Med vänlig hälsning, Rebecca