TL
•
Fungerar mycket bra. Använder den med en partykran och mkt kort slang. Lätt att reglera flödet. Slipper nu lång sytråd.
Ball Lock Flow Control Disconnect
5 recensioner
449 SEK
Stainless quick disconnect with build in Flow Control
Description
Article no.: 809041
Stainless steel self-closing quick disconnect for ball lock cornelius kegs. Fits the liquid-out post
It has a knob on the top for flow control. This makes it easy to balance your draft beer system so that you get a good flow rate and the desired amount of foam. A flow rate of 2.5 - 4 cl per second is usually a good number to aim for.
By restricting the flow directly at the keg, you reduce the risk of any turbulence entering the beer line.
Material: Stainless steel
Threads: 1/4" MFL (corresponds to 7/16" UNF)
Weight: 270 g
Note. Even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.
One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.
It has a knob on the top for flow control. This makes it easy to balance your draft beer system so that you get a good flow rate and the desired amount of foam. A flow rate of 2.5 - 4 cl per second is usually a good number to aim for.
By restricting the flow directly at the keg, you reduce the risk of any turbulence entering the beer line.
Material: Stainless steel
Threads: 1/4" MFL (corresponds to 7/16" UNF)
Weight: 270 g
Note. Even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.
One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
- BrandKegLand
Description
Article no.: 809041
Stainless steel self-closing quick disconnect for ball lock cornelius kegs. Fits the liquid-out post
It has a knob on the top for flow control. This makes it easy to balance your draft beer system so that you get a good flow rate and the desired amount of foam. A flow rate of 2.5 - 4 cl per second is usually a good number to aim for.
By restricting the flow directly at the keg, you reduce the risk of any turbulence entering the beer line.
Material: Stainless steel
Threads: 1/4" MFL (corresponds to 7/16" UNF)
Weight: 270 g
Note. Even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.
One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.
It has a knob on the top for flow control. This makes it easy to balance your draft beer system so that you get a good flow rate and the desired amount of foam. A flow rate of 2.5 - 4 cl per second is usually a good number to aim for.
By restricting the flow directly at the keg, you reduce the risk of any turbulence entering the beer line.
Material: Stainless steel
Threads: 1/4" MFL (corresponds to 7/16" UNF)
Weight: 270 g
Note. Even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.
One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.
Recensioner
Baserat på 5 betyg5 betyg
| 5 | ☆ | |
| 4 | ☆ | |
| 3 | ☆ | |
| 2 | ☆ | |
| 1 | ☆ |
Recensioner (5)
Recensioner (5)
Powered by TestFreaks
KB
•
Bra produkt, trots ett högt pris. Tillsammans med regulatorn för CO2, så slipper jag mixtra med slanglängder, "sytråd", etc. för att få önskat flöde ur kranen (som i detta fall ej ska vara en sådan med flödeskontroll).
MW
•
Hej jag har köpt 2st och en av dessa fungerar perfekt och jag är helnöjd. I början var det svårt att lossa ratten för flödes regleringen men det verkar ge sig och blir lättare och lättare med tiden. En av de kulkopplingar jag mottog är väldigt svår eller nästan omöjlig att trycka dit på fatets kulfattning. Jag har testat på ett flertal fat och på lösa kulfattningar för vätska. Detta känns som ett tillverknings fel så jag kommer kontakta kundtjänst om denna.
MVH Magnus
Visa fler recensioner
Frågor och svar
Ställ en fråga
Frågor och svar (1)
Ställ en fråga
Frågor och svar (1)
Powered by TestFreaks
J
•
Rengöring av denna?
Är det någon som vet om denna går att plocka isär denna för rengöring?
✓
Den går att ta isär. Skruva först loss MFL-gängan från kopplingen och skruva sedan loss det stora vredet.