JA
•
Jag upplever Mr Malt som en väldigt bra butik/leverantör att handla med. Välsorterat och väldigt tillmötesgående personal vid avhämtning.
RAPT Pill Hydrometer
14 recensioner
895 SEK
Description
Article no.: 808977
Digital hydrometer with both Bluetooth and Wifi as well as a rechargeable battery.
The hydrometer measures both density and temperature by floating on the surface of the fermenter. By measuring the angle it is floating in, you can determine the density with great accuracy and thus follow the fermentation process in real time. The values are uploaded and stored in the free RAPT portal.
The Pill is one of the first products in Kegland's new RAPT system that has been developed to digitally connect the entire brewing process in the same platform. The idea is to be able to follow your beer from the mash to the fermentation and to be able to log and control the process remotely. RAPT is still being developed and new products are being released continuously.
The unit is powered by a rechargeable battery that can also be easily replaced if needed. The battery is charged via a standard USB-C (not included) and a charge lasts up to 1.5 years depending on the connection method and how frequent updates of measured values you set.
The shell of the hydrometer is made of food-approved plastic that has good tolerance to both temperature and chemicals. Since the electronics are not glued to the shell, it is possible to change the shell if it should be damaged.
Length: 134 mm
Diameter: 35 mm
NOTE!
At first use, the battery should be charged for 24 hours to ensure that it is fully charged and to calibrate the battery levels.
Once the device is connected via USB-C and connected to a wireless network, it will be automatically updated with the latest firmware. These updates occur only when the device is charging and connected to wifi.
The hydrometer measures both density and temperature by floating on the surface of the fermenter. By measuring the angle it is floating in, you can determine the density with great accuracy and thus follow the fermentation process in real time. The values are uploaded and stored in the free RAPT portal.
The Pill is one of the first products in Kegland's new RAPT system that has been developed to digitally connect the entire brewing process in the same platform. The idea is to be able to follow your beer from the mash to the fermentation and to be able to log and control the process remotely. RAPT is still being developed and new products are being released continuously.
The unit is powered by a rechargeable battery that can also be easily replaced if needed. The battery is charged via a standard USB-C (not included) and a charge lasts up to 1.5 years depending on the connection method and how frequent updates of measured values you set.
The shell of the hydrometer is made of food-approved plastic that has good tolerance to both temperature and chemicals. Since the electronics are not glued to the shell, it is possible to change the shell if it should be damaged.
Length: 134 mm
Diameter: 35 mm
NOTE!
At first use, the battery should be charged for 24 hours to ensure that it is fully charged and to calibrate the battery levels.
Once the device is connected via USB-C and connected to a wireless network, it will be automatically updated with the latest firmware. These updates occur only when the device is charging and connected to wifi.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
- BrandKegLand
Description
Article no.: 808977
Digital hydrometer with both Bluetooth and Wifi as well as a rechargeable battery.
The hydrometer measures both density and temperature by floating on the surface of the fermenter. By measuring the angle it is floating in, you can determine the density with great accuracy and thus follow the fermentation process in real time. The values are uploaded and stored in the free RAPT portal.
The Pill is one of the first products in Kegland's new RAPT system that has been developed to digitally connect the entire brewing process in the same platform. The idea is to be able to follow your beer from the mash to the fermentation and to be able to log and control the process remotely. RAPT is still being developed and new products are being released continuously.
The unit is powered by a rechargeable battery that can also be easily replaced if needed. The battery is charged via a standard USB-C (not included) and a charge lasts up to 1.5 years depending on the connection method and how frequent updates of measured values you set.
The shell of the hydrometer is made of food-approved plastic that has good tolerance to both temperature and chemicals. Since the electronics are not glued to the shell, it is possible to change the shell if it should be damaged.
Length: 134 mm
Diameter: 35 mm
NOTE!
At first use, the battery should be charged for 24 hours to ensure that it is fully charged and to calibrate the battery levels.
Once the device is connected via USB-C and connected to a wireless network, it will be automatically updated with the latest firmware. These updates occur only when the device is charging and connected to wifi.
The hydrometer measures both density and temperature by floating on the surface of the fermenter. By measuring the angle it is floating in, you can determine the density with great accuracy and thus follow the fermentation process in real time. The values are uploaded and stored in the free RAPT portal.
The Pill is one of the first products in Kegland's new RAPT system that has been developed to digitally connect the entire brewing process in the same platform. The idea is to be able to follow your beer from the mash to the fermentation and to be able to log and control the process remotely. RAPT is still being developed and new products are being released continuously.
The unit is powered by a rechargeable battery that can also be easily replaced if needed. The battery is charged via a standard USB-C (not included) and a charge lasts up to 1.5 years depending on the connection method and how frequent updates of measured values you set.
The shell of the hydrometer is made of food-approved plastic that has good tolerance to both temperature and chemicals. Since the electronics are not glued to the shell, it is possible to change the shell if it should be damaged.
Length: 134 mm
Diameter: 35 mm
NOTE!
At first use, the battery should be charged for 24 hours to ensure that it is fully charged and to calibrate the battery levels.
Once the device is connected via USB-C and connected to a wireless network, it will be automatically updated with the latest firmware. These updates occur only when the device is charging and connected to wifi.
Recensioner
Baserat på 14 betyg14 betyg
| 5 | ☆ | |
| 4 | ☆ | |
| 3 | ☆ | |
| 2 | ☆ | |
| 1 | ☆ |
Recensioner (14)
Recensioner (14)
Powered by TestFreaks
OL
•
Funkar skapligt när man väl fått igång den. Installationen var ganska omständig. Behövde återställa enheten flera gånger för att den skulle ansluta till nätverket. Har inte ännu fått den att fungera inuti kylskåp/jäskammare.
Funkar den inte via Wifi ska man kunna koppla den till deras egna termostat som kostar 1000kr. Då blev denna inte alls lika billig längre. Blir bara 2 stjärnor eftersom de valt att låsa ner bluetooth-funktionaliteten.
JA
•
Mycket bra instrument för att hålla koll på både OG/FG (utan kladd med glashydrometer) och temperatur. Jag är helt nöjd med denna Rapt pill även om det initiala digitala uppkopplingsarbetet tog lite tid för mig.
DB
•
Mycket trevligt verktyg. Lite fippligt att komma igång och synd att bluetooth bara funkar med Rapts egna termostat och fermentor men det är inget som bör avskräcka från köp. Otroligt tillfredsställande att kunna läsa av SG, temp och alkoholhalt utan att behöva ta ut prov ut jäskärlet!
Visa fler recensioner
Frågor och svar
Ställ en fråga
Frågor och svar (2)
Ställ en fråga
Frågor och svar (2)
Powered by TestFreaks
J
•
Hej! Jag har bara rostfria jäskärl (Brew Bucket från Brewtech). Kommer bluetooth och (eller) Wifi signal genom kärlet ?
✓
Hej
Wifi har ibland svårt att ta sig igenom rostfritt, speciellt om routern redan står bakom några väggar. Bluetooth brukar klara sig bättre genom stål. Om du googlar lite på ämnet så finns det flera bra forumtrådar om folks erfarenheter som kanske kan vara till hjälp
Mvh Alexander
F
•
Påverkas av kolsyrenivån i ölen?
Hej,
Jag sekundärjäser under tryck, dvs den koldioxid som jästen skapar får inte pysa ut, istället så börjar ölen kolsyras.
Kan kolsyran i ölen påverka mätvärdet? Tänker att bubblorna även fäster på Rapt Pill och ”lyfter” den en aning. Liknande vad som händer när man stoppar ner ett sugrör i kolsyrad dryck…
Eller händer inte detta så länge kärlet är under tryck?
✓
Hej
Ja, det kan påverka i stunden men över tiden så lägger det sig. När jäsningen är som häftigast kommer det bildas bubblor på skalet som ger lite extra lyftkraft och aningen påverkar mätningen. När jäsningen börjar avta kommer det bildas mindre C02 och färre bubblor kommer stanna kvar och mätningen kommer börja bli mer exakt igen. Om du tryckjäser i sekundären så kommer kolsyran börja stanna kvar i lösning tidigare och därmed borde värdet bli "rätt" lite snabbare. Slutvärdet i båda fallen borde dock bli pålitligt även om andra faktorer så som proteinrester kan fastna på skalet och påverka.
Hoppas det ger svar på dina funderingar Mvh Alexander
Files and media
 | Instructions |