New
CO2 Regulator v2 for CO2 bottle 425 g
799 SEK
Gas regulator for CO2, with fitting for 425 g gas bottles
Description
Article no.: 895283
Pressure regulator for carbon dioxide (CO2) for carbonating and serving. Fits directly on a CO2 bottle, 425 g. No additional adapter is needed for use with SodaStream-type gas bottles.
Pressure gauges for remaining pressure in the CO2 cylinder and the set pressure after reduction. The primary gauge shows the remaining pressure in the CO2 tank, graduated from 0 to 250 bar, the secondary gauge shows the reduced pressure applied to the keg, graduated from 0 to 6 bar.
Inlet connection: 21-6 ACME 2G (standard for CO2 bottle 425 g).
Outlet connection: 6 mm barb. The connected hose should be secured with a hose clamp.
If possible, choose CO2 bottles with wide and flat valve pins. Narrower valve pin designs might stay shut and not open correctly by the regulator. For the CO2 bottle to open, it needs to be tightly installed in the regulator and may require strong but gentle twisting when mounting.
The gasket which creates a seal toward the CO2 bottle will last longer if the CO2 bottle is completely empty, before dismounting the regulator.
For use with larger CO2 cylinders, consider one of ourgas regulators with standard CO2-threading (W21,8*1/14 RH) in combination with a CO2 adapter.
Pressure gauges for remaining pressure in the CO2 cylinder and the set pressure after reduction. The primary gauge shows the remaining pressure in the CO2 tank, graduated from 0 to 250 bar, the secondary gauge shows the reduced pressure applied to the keg, graduated from 0 to 6 bar.
Inlet connection: 21-6 ACME 2G (standard for CO2 bottle 425 g).
Outlet connection: 6 mm barb. The connected hose should be secured with a hose clamp.
If possible, choose CO2 bottles with wide and flat valve pins. Narrower valve pin designs might stay shut and not open correctly by the regulator. For the CO2 bottle to open, it needs to be tightly installed in the regulator and may require strong but gentle twisting when mounting.
The gasket which creates a seal toward the CO2 bottle will last longer if the CO2 bottle is completely empty, before dismounting the regulator.
For use with larger CO2 cylinders, consider one of ourgas regulators with standard CO2-threading (W21,8*1/14 RH) in combination with a CO2 adapter.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
Description
Article no.: 895283
Pressure regulator for carbon dioxide (CO2) for carbonating and serving. Fits directly on a CO2 bottle, 425 g. No additional adapter is needed for use with SodaStream-type gas bottles.
Pressure gauges for remaining pressure in the CO2 cylinder and the set pressure after reduction. The primary gauge shows the remaining pressure in the CO2 tank, graduated from 0 to 250 bar, the secondary gauge shows the reduced pressure applied to the keg, graduated from 0 to 6 bar.
Inlet connection: 21-6 ACME 2G (standard for CO2 bottle 425 g).
Outlet connection: 6 mm barb. The connected hose should be secured with a hose clamp.
If possible, choose CO2 bottles with wide and flat valve pins. Narrower valve pin designs might stay shut and not open correctly by the regulator. For the CO2 bottle to open, it needs to be tightly installed in the regulator and may require strong but gentle twisting when mounting.
The gasket which creates a seal toward the CO2 bottle will last longer if the CO2 bottle is completely empty, before dismounting the regulator.
For use with larger CO2 cylinders, consider one of ourgas regulators with standard CO2-threading (W21,8*1/14 RH) in combination with a CO2 adapter.
Pressure gauges for remaining pressure in the CO2 cylinder and the set pressure after reduction. The primary gauge shows the remaining pressure in the CO2 tank, graduated from 0 to 250 bar, the secondary gauge shows the reduced pressure applied to the keg, graduated from 0 to 6 bar.
Inlet connection: 21-6 ACME 2G (standard for CO2 bottle 425 g).
Outlet connection: 6 mm barb. The connected hose should be secured with a hose clamp.
If possible, choose CO2 bottles with wide and flat valve pins. Narrower valve pin designs might stay shut and not open correctly by the regulator. For the CO2 bottle to open, it needs to be tightly installed in the regulator and may require strong but gentle twisting when mounting.
The gasket which creates a seal toward the CO2 bottle will last longer if the CO2 bottle is completely empty, before dismounting the regulator.
For use with larger CO2 cylinders, consider one of ourgas regulators with standard CO2-threading (W21,8*1/14 RH) in combination with a CO2 adapter.
Frågor och svar
Ställ en fråga
Frågor och svar