EL
•
Snabb och trevlig hjälp från kundtjänst de få gånger jag behövt kontakta den.
Holder for CO2 Bottle 425 g
11 recensioner
159 SEK
Makes it easier for you to organize your keg
Description
Article no.: 894230
3D-printed holder for CO2 Bottle 425 g.
Practical for storing and transporting the CO2 bottle with the corny keg.
Discrete design in black plastic.
The upper holder part has a bracket to put the Picnic faucet in, when not in use. Perfect for events and homebrew competitions.
The holder fits snugly against the corny keg, and fits common corny kegs of 9 l, 18 l and 19 l.
To fasten the holder parts, you have to use 2 fastening straps (not included).
Straps up to 30 mm wide fits in the strap openings of the holder.
The plastic material in the holders was made from corn starch.
Practical for storing and transporting the CO2 bottle with the corny keg.
Discrete design in black plastic.
The upper holder part has a bracket to put the Picnic faucet in, when not in use. Perfect for events and homebrew competitions.
The holder fits snugly against the corny keg, and fits common corny kegs of 9 l, 18 l and 19 l.
To fasten the holder parts, you have to use 2 fastening straps (not included).
Straps up to 30 mm wide fits in the strap openings of the holder.
The plastic material in the holders was made from corn starch.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
Description
Article no.: 894230
3D-printed holder for CO2 Bottle 425 g.
Practical for storing and transporting the CO2 bottle with the corny keg.
Discrete design in black plastic.
The upper holder part has a bracket to put the Picnic faucet in, when not in use. Perfect for events and homebrew competitions.
The holder fits snugly against the corny keg, and fits common corny kegs of 9 l, 18 l and 19 l.
To fasten the holder parts, you have to use 2 fastening straps (not included).
Straps up to 30 mm wide fits in the strap openings of the holder.
The plastic material in the holders was made from corn starch.
Practical for storing and transporting the CO2 bottle with the corny keg.
Discrete design in black plastic.
The upper holder part has a bracket to put the Picnic faucet in, when not in use. Perfect for events and homebrew competitions.
The holder fits snugly against the corny keg, and fits common corny kegs of 9 l, 18 l and 19 l.
To fasten the holder parts, you have to use 2 fastening straps (not included).
Straps up to 30 mm wide fits in the strap openings of the holder.
The plastic material in the holders was made from corn starch.
Recensioner
Baserat på 11 betyg11 betyg
| 5 | ☆ | |
| 4 | ☆ | |
| 3 | ☆ | |
| 2 | ☆ | |
| 1 | ☆ |
Recensioner (11)
Recensioner (11)
Powered by TestFreaks
JL
•
Smart och enkel pryl! Hade kunnat vara billigare om Humlegården fann en bättre partner som kunde massproducera istället för 3D-printing.
TL
•
Bra kvalitet på 3D utskriften, men glider och har sig på fatet.
LL
•
Håller tuben på plats. Gör att man enkelt kan flytta fat och tub samtidigt utan att koppla bort.
Visa fler recensioner
Frågor och svar
Ställ en fråga
Frågor och svar