EL
•
Snabb och trevlig hjälp från kundtjänst de få gånger jag behövt kontakta den.
PET-adapter yellow (plastic)
4 recensioner
69 SEK
Description
Article no.: 810799
For those of you who want to keep your adapters distinct, the PET adapter is now also available in yellow!
Plastic "Carbonation Cap" for PET bottles. It has a flat 6.5 mm hose barb on the inside where you can attach tubing to be used as a dip tube. The keg post fits both Liquid and Gas ball-lock disconnects.
The barb also fits 6.5 mm and 1/4" push-in fittings.
Can be used for:
• Counter-pressure filling PET bottles
• Carbonating beer in PET bottles
• Rinsing and cleaning draft beer systems
Here's how to use the adapter to counter-pressure fill beer into a PET bottle from a keg:
Plastic "Carbonation Cap" for PET bottles. It has a flat 6.5 mm hose barb on the inside where you can attach tubing to be used as a dip tube. The keg post fits both Liquid and Gas ball-lock disconnects.
The barb also fits 6.5 mm and 1/4" push-in fittings.
Can be used for:
• Counter-pressure filling PET bottles
• Carbonating beer in PET bottles
• Rinsing and cleaning draft beer systems
Here's how to use the adapter to counter-pressure fill beer into a PET bottle from a keg:
- Attach a fitting and hose on the inside so that the hose reaches the bottom of the bottle.
- Screw the adapter to the empty bottle.
- Attach the gas ball-lock fitting and apply a low pressure. Unscrew the adapter a little bit so it starts to leak, and allow to leak for about 10 seconds. First, it's air that pours out. The air is gradually replaced by CO2. Re-attach the adapter.
- Apply a pressure that corresponds approximately to the pressure in the keg.
- Remove the gas fitting and attach the beer beer fitting to the adapter.
- If the pressure in the bottle is lower than in the keg, the beer will flow from the keg to the bottle. Carefully unscrew the adapter slightly to reduce the pressure in the bottle to maintain a smooth flow. When the bottle is full, screw the adapter completely on and remove the beer fitting.
- If you want to, you can replace the adapter with a standard cap. Allow the bottle to rest a few minutes in the fridge before switching from adapter to the cap.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
- BrandKegLand
Description
Article no.: 810799
For those of you who want to keep your adapters distinct, the PET adapter is now also available in yellow!
Plastic "Carbonation Cap" for PET bottles. It has a flat 6.5 mm hose barb on the inside where you can attach tubing to be used as a dip tube. The keg post fits both Liquid and Gas ball-lock disconnects.
The barb also fits 6.5 mm and 1/4" push-in fittings.
Can be used for:
• Counter-pressure filling PET bottles
• Carbonating beer in PET bottles
• Rinsing and cleaning draft beer systems
Here's how to use the adapter to counter-pressure fill beer into a PET bottle from a keg:
Plastic "Carbonation Cap" for PET bottles. It has a flat 6.5 mm hose barb on the inside where you can attach tubing to be used as a dip tube. The keg post fits both Liquid and Gas ball-lock disconnects.
The barb also fits 6.5 mm and 1/4" push-in fittings.
Can be used for:
• Counter-pressure filling PET bottles
• Carbonating beer in PET bottles
• Rinsing and cleaning draft beer systems
Here's how to use the adapter to counter-pressure fill beer into a PET bottle from a keg:
- Attach a fitting and hose on the inside so that the hose reaches the bottom of the bottle.
- Screw the adapter to the empty bottle.
- Attach the gas ball-lock fitting and apply a low pressure. Unscrew the adapter a little bit so it starts to leak, and allow to leak for about 10 seconds. First, it's air that pours out. The air is gradually replaced by CO2. Re-attach the adapter.
- Apply a pressure that corresponds approximately to the pressure in the keg.
- Remove the gas fitting and attach the beer beer fitting to the adapter.
- If the pressure in the bottle is lower than in the keg, the beer will flow from the keg to the bottle. Carefully unscrew the adapter slightly to reduce the pressure in the bottle to maintain a smooth flow. When the bottle is full, screw the adapter completely on and remove the beer fitting.
- If you want to, you can replace the adapter with a standard cap. Allow the bottle to rest a few minutes in the fridge before switching from adapter to the cap.
Recensioner
Baserat på 4 betyg4 betyg
| 5 | ☆ | |
| 4 | ☆ | |
| 3 | ☆ | |
| 2 | ☆ | |
| 1 | ☆ |
Recensioner (4)
Recensioner (4)
Frågor och svar
Ställ en fråga
Frågor och svar