rinse hose for cornelius kegs

Hose kit that makes it easy to rinse the keg with water during cleaning. Also suitable for filling the keg with water when making kegged sparkling water.

Fits ball-lock cornelius kegs.

The package includes:
Hose Connector Gardena
Braided PVC hose (10 x 15 mm), 1 meter
Hose clamp
John Guest 3/8" stem - 9,5 mm barb
John Guest 3/8" - 1/4" FFL
Threaded ball lock disconnect - 1/4" MFL - gas (fits both gas-in and liquid-out posts)

The parts are easily assembled according to the picture.

Here's how you can clean Cornelius dishes:
1. Release the excess pressure in the keg and open the lid. Empty if there is any left.
2. Connect the gardena coupling to a water tap and the ball-lock disconnect to the keg.
3. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.
4. Set the barrel up and fill up with hot water and add e.g. PBW.
5. Replace the lid and flush some detergent through both gas and liquid posts and the safety valve. Leave for about 15 minutes.
6. Release the excess pressure and open the lid. Empty the cleaning agent (or transfer to the next keg if you are cleaning several at the same time).
7. Connect the gardena coupling to a water tap and the disconnect to the keg.
8. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.
9. Sanitize the keg with e.g. Star San just before filling the next batch.

Tip: Buy a threaded PET adapter and you can also easily rinse your beer lines too.