EL
•
Snabb och trevlig hjälp från kundtjänst de få gånger jag behövt kontakta den.
Chugger TCPSS-CI (Center, Stainless)
3,790 SEK
Description
Article no.: 830900
The Chugger pumps are heat resistant (can handle liquids of 120 °C) and are made from food grade materials, thus ideal for pumping both hot and cold wort. Thanks to the magnetic drive, it's completely leak-proof.
The pump is not self-priming and must therefore be placed low in the system so that it fills with fluid.
The motor on this pump is TEFC (Totally Enclosed Fan Cooled) and thereby protected against splashes.
Please note: The motor is preset for 115 V. For usage in Europe this must be changed for 230 V before first use. This is done via an easily accessible switch under the motor cover. Delivered without a plug and should be installed by a qualified electrician.
General Specification:
Model: TCPSS-CI
Inlet 3/4" MPT
Outlet 1/2" MPT
Materials: 316 STAINLESS STEEL (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton/Teflon Impeller
Max Flow 7 GPM (26.5 LPM)
Max Head 18.6 FT (5.6 M)
Max Temp: 250 ºF (120 ºC)
Power: 1/8 HP (.125 HP)
Electrical: 230V & 115V
Hz: 50/60RPM: 3500
TEFC (Totally Enclosed Fan Cooled) Motor
Motor AMP Rating - Full Load Amps (FLA)
Motor Only: 1.4 Amps
Motor and Pump: 2.0 Amps
Materials are FDA Food Compliant
Components are UL Recognized
Chugger Max contains sealed bearings. No oil necessary.
The pump is not self-priming and must therefore be placed low in the system so that it fills with fluid.
The motor on this pump is TEFC (Totally Enclosed Fan Cooled) and thereby protected against splashes.
Please note: The motor is preset for 115 V. For usage in Europe this must be changed for 230 V before first use. This is done via an easily accessible switch under the motor cover. Delivered without a plug and should be installed by a qualified electrician.
General Specification:
Model: TCPSS-CI
Inlet 3/4" MPT
Outlet 1/2" MPT
Materials: 316 STAINLESS STEEL (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton/Teflon Impeller
Max Flow 7 GPM (26.5 LPM)
Max Head 18.6 FT (5.6 M)
Max Temp: 250 ºF (120 ºC)
Power: 1/8 HP (.125 HP)
Electrical: 230V & 115V
Hz: 50/60RPM: 3500
TEFC (Totally Enclosed Fan Cooled) Motor
Motor AMP Rating - Full Load Amps (FLA)
Motor Only: 1.4 Amps
Motor and Pump: 2.0 Amps
Materials are FDA Food Compliant
Components are UL Recognized
Chugger Max contains sealed bearings. No oil necessary.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
- BrandChugger
Description
Article no.: 830900
The Chugger pumps are heat resistant (can handle liquids of 120 °C) and are made from food grade materials, thus ideal for pumping both hot and cold wort. Thanks to the magnetic drive, it's completely leak-proof.
The pump is not self-priming and must therefore be placed low in the system so that it fills with fluid.
The motor on this pump is TEFC (Totally Enclosed Fan Cooled) and thereby protected against splashes.
Please note: The motor is preset for 115 V. For usage in Europe this must be changed for 230 V before first use. This is done via an easily accessible switch under the motor cover. Delivered without a plug and should be installed by a qualified electrician.
General Specification:
Model: TCPSS-CI
Inlet 3/4" MPT
Outlet 1/2" MPT
Materials: 316 STAINLESS STEEL (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton/Teflon Impeller
Max Flow 7 GPM (26.5 LPM)
Max Head 18.6 FT (5.6 M)
Max Temp: 250 ºF (120 ºC)
Power: 1/8 HP (.125 HP)
Electrical: 230V & 115V
Hz: 50/60RPM: 3500
TEFC (Totally Enclosed Fan Cooled) Motor
Motor AMP Rating - Full Load Amps (FLA)
Motor Only: 1.4 Amps
Motor and Pump: 2.0 Amps
Materials are FDA Food Compliant
Components are UL Recognized
Chugger Max contains sealed bearings. No oil necessary.
The pump is not self-priming and must therefore be placed low in the system so that it fills with fluid.
The motor on this pump is TEFC (Totally Enclosed Fan Cooled) and thereby protected against splashes.
Please note: The motor is preset for 115 V. For usage in Europe this must be changed for 230 V before first use. This is done via an easily accessible switch under the motor cover. Delivered without a plug and should be installed by a qualified electrician.
General Specification:
Model: TCPSS-CI
Inlet 3/4" MPT
Outlet 1/2" MPT
Materials: 316 STAINLESS STEEL (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton/Teflon Impeller
Max Flow 7 GPM (26.5 LPM)
Max Head 18.6 FT (5.6 M)
Max Temp: 250 ºF (120 ºC)
Power: 1/8 HP (.125 HP)
Electrical: 230V & 115V
Hz: 50/60RPM: 3500
TEFC (Totally Enclosed Fan Cooled) Motor
Motor AMP Rating - Full Load Amps (FLA)
Motor Only: 1.4 Amps
Motor and Pump: 2.0 Amps
Materials are FDA Food Compliant
Components are UL Recognized
Chugger Max contains sealed bearings. No oil necessary.
Frågor och svar
Ställ en fråga
Frågor och svar