CH
•
Smidigt med snabbkopplingar vilket gör det lätt att montera ihop med befintlig utrustning som är lätt att rengöra. Tidigare mottryckfyllare med slang o slangklämmor är ett tidskrävande system och kräver byte av slangkopplingar ofta.
New
Ball-Lock Counter Pressure Filler
1 recension
799 SEK
For filling carbonated beverage into bottles
Description
Article no.: 803425
Stainless steel counter pressure bottle filler with ball-lock posts for connecting for liquid and CO2. For filling carbonated beverages from a keg into bottles.
The bottles are filled from the bottom up, in an oxygen-free environment. The CO2 back pressure in the bottle prevents the beer from foaming.
Works best with cold liquids at a pressure between 0.6-1.1 bar.
The ball valve has three positions: Gas on - Liquid on - Off.
The pressure relief valve is manually adjustable and allows fine tuning the filling rate.
First, CO2 is added to the bottle to form an overpressure / back pressure. Remaining air is vented through the pressure relief valve.
When the main valve is turned, the gas supply closes and the beer line opens. The back pressure in the bottle causes the bottle to fill at a slow pace with moderate foaming.
When the bottle is full, shut off the flow by turning the valve to the Off position. After a few seconds the overpressure has vented and the bottle can be capped on foam.
Fits bottles with minimum height 22 cm and 14 - 20 mm bottle mouth. For higher bottles, a piece of tubing may be added as an extension to reach the bottom.
We recommend CIP (Clean In Place) with PBW or Enzybrew after use, followed by thourough rinsing with water.
Use Star San, Saniclean or similar sanitizer before the next filling session.
Silicone stopper 22/17 mm included.
Larger silicone stoppers can be purchased for use with growlers and other larger-sized bottles.
The bottles are filled from the bottom up, in an oxygen-free environment. The CO2 back pressure in the bottle prevents the beer from foaming.
Works best with cold liquids at a pressure between 0.6-1.1 bar.
The ball valve has three positions: Gas on - Liquid on - Off.
The pressure relief valve is manually adjustable and allows fine tuning the filling rate.
First, CO2 is added to the bottle to form an overpressure / back pressure. Remaining air is vented through the pressure relief valve.
When the main valve is turned, the gas supply closes and the beer line opens. The back pressure in the bottle causes the bottle to fill at a slow pace with moderate foaming.
When the bottle is full, shut off the flow by turning the valve to the Off position. After a few seconds the overpressure has vented and the bottle can be capped on foam.
Fits bottles with minimum height 22 cm and 14 - 20 mm bottle mouth. For higher bottles, a piece of tubing may be added as an extension to reach the bottom.
We recommend CIP (Clean In Place) with PBW or Enzybrew after use, followed by thourough rinsing with water.
Use Star San, Saniclean or similar sanitizer before the next filling session.
Silicone stopper 22/17 mm included.
Larger silicone stoppers can be purchased for use with growlers and other larger-sized bottles.
- Fast delivery
- International shipping
- E-mail us, we reply swiftly!
Description
Article no.: 803425
Stainless steel counter pressure bottle filler with ball-lock posts for connecting for liquid and CO2. For filling carbonated beverages from a keg into bottles.
The bottles are filled from the bottom up, in an oxygen-free environment. The CO2 back pressure in the bottle prevents the beer from foaming.
Works best with cold liquids at a pressure between 0.6-1.1 bar.
The ball valve has three positions: Gas on - Liquid on - Off.
The pressure relief valve is manually adjustable and allows fine tuning the filling rate.
First, CO2 is added to the bottle to form an overpressure / back pressure. Remaining air is vented through the pressure relief valve.
When the main valve is turned, the gas supply closes and the beer line opens. The back pressure in the bottle causes the bottle to fill at a slow pace with moderate foaming.
When the bottle is full, shut off the flow by turning the valve to the Off position. After a few seconds the overpressure has vented and the bottle can be capped on foam.
Fits bottles with minimum height 22 cm and 14 - 20 mm bottle mouth. For higher bottles, a piece of tubing may be added as an extension to reach the bottom.
We recommend CIP (Clean In Place) with PBW or Enzybrew after use, followed by thourough rinsing with water.
Use Star San, Saniclean or similar sanitizer before the next filling session.
Silicone stopper 22/17 mm included.
Larger silicone stoppers can be purchased for use with growlers and other larger-sized bottles.
The bottles are filled from the bottom up, in an oxygen-free environment. The CO2 back pressure in the bottle prevents the beer from foaming.
Works best with cold liquids at a pressure between 0.6-1.1 bar.
The ball valve has three positions: Gas on - Liquid on - Off.
The pressure relief valve is manually adjustable and allows fine tuning the filling rate.
First, CO2 is added to the bottle to form an overpressure / back pressure. Remaining air is vented through the pressure relief valve.
When the main valve is turned, the gas supply closes and the beer line opens. The back pressure in the bottle causes the bottle to fill at a slow pace with moderate foaming.
When the bottle is full, shut off the flow by turning the valve to the Off position. After a few seconds the overpressure has vented and the bottle can be capped on foam.
Fits bottles with minimum height 22 cm and 14 - 20 mm bottle mouth. For higher bottles, a piece of tubing may be added as an extension to reach the bottom.
We recommend CIP (Clean In Place) with PBW or Enzybrew after use, followed by thourough rinsing with water.
Use Star San, Saniclean or similar sanitizer before the next filling session.
Silicone stopper 22/17 mm included.
Larger silicone stoppers can be purchased for use with growlers and other larger-sized bottles.
Recensioner
Frågor och svar
Ställ en fråga
Frågor och svar (1)
Ställ en fråga
Frågor och svar (1)
Powered by TestFreaks
M
•
Anslutning
Vilken typ av kopplingar behövs för att ansluta gas och öl?
✓
Du ansluter med kulkoppling för corneliusfat. Det är samma typ som du hittar på artikelsidan för mottrycksfyllaren, en bit ned under sektionen "Passar ihop med".
-- Klas